ACOUSTIC SPECIFICATION

// A/B PROTOCOL

OVERVIEW // DETERMINISTIC 7.83 HZ CALIBRATION

Basalt is a deterministic acoustic compiler authored by Argelys Samuel Oriach at Seven Eighty Three. Its 7.83 Hz reference informs WAV mastering and real-time broadcast processing.

The listening objective is greater perceived depth and less fatigue on dense material. Strong limiting can reduce transient contrast and dynamic range. Basalt treats A4 = 440.00 Hz as a pitch reference and aims to preserve transient punch and usable headroom. Check output peaks and loudness before distribution.

THREE-STAGE SONIC ARCHITECTURE

STAGE 01 // HARMONIC OCTAVE SCALING

The default WAV profile sets nominal A4 to 446.45 Hz, a +25.19 cent shift from 440.00 Hz. Its equal-tempered B4 corresponds to the 501.12 Hz sixth octave of 7.83 Hz. Listen for a shift in pitch, perceived warmth, and presence. Pitch-preserve mode retains the original tuning and still applies the remaining stages. Live radio preserves the station’s pitch and broadcast clock.

STAGE 02 // PHASE-COHERENT 7.83 HZ STEREO FIELD

The calibrated signal adds a low-level 7.83 Hz stereo differential, nominally around −35 dBFS, with a mono-compatible isochronic pulse. Listen on headphones or studio monitors for changes in spatial separation. Carrier audibility depends on the program material and playback system.

STAGE 03 // DYNAMIC BREATH-ENVELOPE CALIBRATION

A subtle gain envelope follows a 7.83 Hz cycle of approximately 127.7 ms. Listen for changes in rhythmic movement and transient contrast on dense masters at matched listening levels.

A/B VERIFICATION METHODOLOGY

  1. INGEST. Use an uncompressed PCM WAV, such as a 16-bit or 24-bit master sampled at 44.1 to 192 kHz. Choose whether to retune before you compile.
  2. VERIFY TWO BUFFERS. The WAV console separately decodes the input and the compiled WAV. It enables Calibrated only after both file hashes match the receipt and the decoded output is available.
  3. SWITCH AT THE PLAYHEAD. Use Spacebar to alternate, or press 1 for Raw and 2 for Calibrated. The WAV console starts the selected buffer at the corresponding sample-aligned offset. Retuned files can have different durations. In radio, Spacebar switches between two buses fed by one continuous stream, with a 30 ms gain transition and a brief mute cue. Listen for changes in depth, stereo width, and transient snap.
  4. CHECK THE FILES. Recompute each SHA-256 hash and compare it with the receipt. For a separate null comparison, use pitch-preserve mode, align the files to the sample, and match levels before subtraction. The receipt reports input RMS, input crest factor, and pitch shift. Check output true peak and any crest factor change separately.

TELEMETRY & JSON AUDIT RECEIPT

Captured from POST /api/compile using a synthetic 48 kHz, 24-bit stereo WAV with retuning enabled. The response was a binary WAV. This JSON came from its X-BASALT-AUDIT header.

{
  "engine": "BASALT-DSP-1.0",
  "target_hz": 7.83,
  "pitch_mode": "SCALED_446_45",
  "input_sha256": "c78a2eca722f8026a880226921c1e16f1df6b80a2f0efda4e655db0963b34939",
  "output_sha256": "195798f35cf2dea8167573565c9a7d2f1ba97ba00cc8c28961e2c4cb77c2c969",
  "parity_status": "7.83 HZ LOCK // PARITY ACHIEVED",
  "input_rms_db": -17.9,
  "crest_factor_db": 3.01,
  "status": "7.83 HZ LOCK // PARITY ACHIEVED",
  "pitch_shift_cents": 25.19,
  "carrier_injection_hz": 7.83
}

COMMERCIAL API & ENTERPRISE INTEGRATION

Send multipart/form-data to POST /api/compile with an issued X-BASALT-KEY, a PCM WAV in file, and optional retune=false to preserve pitch. The response includes the compiled WAV and its audit receipt.

Licensees can integrate file-by-file calibration into batch catalog remastering or evaluate continuous stream routing in Basalt Radio. For commercial and broadcast licensing, contact hello@seveneightythree.com.